HANNA Instruments Logo

The Significance of Pool and Spa Water Testing

Share on linkedin
Share on facebook
Share on twitter
Share on whatsapp
Read the most detailed informations about methods and tools used in every industry: agriculture, food and beverage, process equipment and laboratory equipment. Subscribe to our newsletter to keep up to date!

 

Pool and Spa Water Testing:

In swimming pool treatment, disinfection or sanitizing is essential to rid the pool of bacteria and control nuisance organisms like algae which may occur in the pool, filtration equipment, and piping. There are a number of available disinfectant compounds, including chlorine, bromine, and ozone dosing systems, of which chlorine is the most common.

Chlorine

hi3887_1200

Swimming Pool Chemical Test Kit

Chlorine is a strong oxidizing agent that destroys organic pollutants and bacteria. Chlorine combines with compounds containing nitrogen to form chloramines, during which only part of the chlorine will be used while the rest remains active, continuing it ’s disinfecting action.

Combined chlorine is the quantity of chlorine that has already combined with nitrogen-containing compounds. It is much less effective as a disinfectant than free chlorine. The addition of combined chlorine and free chlorine gives total chlorine. A pool manager needs to aim for the perfect balance where free and total chlorine is proportionally equal, and thus to keep the combined chlorine levels near zero. The presence of chloramines is undesirable because of the distinctive ‘swimming pool smell’ as well as irritation to the eyes and mucous membranes caused by combined chlorines like dichloramines.

Commercial chlorine for disinfection may be available as a gas (Cl ), liquid-like sodium hypochlorite or bleach (NaOCl) or in a solid-state like calcium hypochlorite, chlorohydantoins or chloroauric acid compounds. These compounds, once dissolved in water, establish equilibrium between the hypochlorous acid (HOCl) and the hypochlorite ions (OCl¯). Although both forms are considered free chlorine, it is the hypochlorous acid that provides the strongest disinfecting and oxidizing characteristics of chlorine solutions. The amount of hypochlorous acid in chlorinated water depends upon the pH value of the solution. Changes in pH value will affect the HOCl equilibrium in relation to the hydrogen and hypochlorite ions.

HOCl vs pH

As depicted in the graph, HOCl decreases, and OCl¯ increases as pH increases. At a low pH, almost all the free chlorine is in the molecular form HOCl, and at a pH of around 7.5, the ratio between HOCl and OCl¯ is 50:50. Since the ionic form OCl¯ is a slow-acting sanitizer while the molecular HOCl is a fast-acting,  it is important to measure pH regularly. As a general rule, a pH of about 7.2 is recommended to maintain fast-acting disinfection conditions.

Ideal chlorine concentrations vary depending on the conditions in the pool or spa. Chlorine will break down when exposed to UV light. To stabilize chlorine in the presence of UV light, cyanuric acid may be added to outdoor pools. However, high cyanuric acid levels can also lower the sanitation power of chlorine.

Bromine

swimming poolIn many countries, bromine sanitizing has been introduced as an alternative to chlorine, although it is not as strong. The advantage of bromine lies in its stability at higher temperatures (advantageous for heated pools and hot tubs), and its maintained disinfection power at a higher pH. Furthermore, there is very little reaction between bromine and nitrogen compounds, reducing the unpleasant odor, and eye irritation problems. The main disadvantage of bromine is the slower acting disinfecting power, making it less suitable for larger pools.

Ozone

Ozone is a very strong oxidizing agent that destroys organic compounds that are especially difficult to oxidize. It allows the pool manager to very efficiently remove combined chlorine without frequently refreshing large amounts of pool water. By the time the water passes through the filter units, ozone has already completed sanitizing, and it is not affected by the pH level.

Mainly because of its strong oxidizing power, the return water may contain trace concentrations of ozone. It imperative to know that ozone is very unstable, so to ensure thorough sanitization of the water, low-level chlorination remains necessary.

Calcium

HI720_600x600

Calcium Hardness Checker

The presence of calcium in the system is desired to ensure filming on those places where the temperature is relatively high, like in boilers and pipes transporting warm water. Scaling must be avoided because it reduces heat transfer and pump capacity, and causes cloudiness in the water.

It is recommended to maintain the calcium hardness value within the range from 200 to 400 ppm as calcium carbonate (CaCO₃).

Alkalinity

HI775-CheckerHC-Open-Angle_detail

HI775 Alkalinity Checker®

Alkalinity is the measure of the total concentration of alkaline substances, mostly bicarbonates, dissolved in the water. The higher the alkalinity, the more resistant the water is to pH change. At the same time, high alkaline water is a major contributor to scaling problems like incrustation in filtration equipment, pumps, and piping.

It is recommended to maintain the alkalinity value within the range from 80 to 125 ppm as calcium carbonate (CaCO₃).

 

pH

HI12302_600x600

HALO Bluetooth pH Meter

The pH of the water is an important factor since at lower pH levels the corrosion rate increases. If the alkalinity values are sufficiently high, it will not be difficult to control the pH. Most pool managers prefer to keep the pH between 7.2 and 7.4 to best maintain low corrosion rates and a sufficient activity of chlorine.

Temperature

Microorganisms grow more rapidly at higher temperatures, so the required sanitization level for a swimming pool or spa is highly dependent on the water temperature; this is especially concerning for heated pools and spas. A general rule of thumb is that for every 5.5°C increase in water temperature over 27°C, the concentration of required sanitizer is doubled.

ORP (Redox)

While free chlorine is a measure of the quantity of available chlorine present in pool and spa water, other water properties may affect the ability of that chlorine to properly disinfect. A sufficient concentration of free chlorine may be present in solution, but based on certain properties it may not be effectively sanitizing. Oxidation-reduction potential (ORP) directly measures how strong the oxidizing potential in a solution is, thus determining the sanitation effectiveness. Two pools with the same free chlorine concentration may have completely different ORP values based on pH, cyanuric acid concentration, and temperature. Therefore, ORP is the best indication of how effectively the pool or spa water is being sanitized. While optimal concentration levels vary based on the type of sanitizer being used, the ORP level should be maintained above 650 mV for pools and spas treated with chlorine, bromine, or iodine.

 

The Water Balance and Langelier Index

Swimming pool testing 2Pool water characteristics need to be maintained in a balanced state to avoid numerous issues. Measuring certain variables is extremely important to predict if the water is corrosive or will cause scaling.

A saturation index developed by Dr. Wilfred Langelier is widely used to predict the balance of swimming pool waters. It represents the estimation of a solution’s ability to dissolve or precipitate calcium carbonate deposits. A certain level of this precipitation (filming) is desired to insulate pipes and boilers from contact with water. When no protective filming is formed, water is considered to be corrosive. On the other hand, too much filming can develop into scaling and incrustation of the pipes. In the treatment and monitoring of pool water, the pool manager must ensure that related parameters such as alkalinity, hardness, and pH are carefully monitored in addition to sanitizing chemicals.

The Langelier Index is a powerful tool to calculate the water balance and to predict corrosion or scaling problems. Theoretically, a LI of zero indicates perfect water conditions for swimming pools. If LI>0, scaling and staining of the water are present, and if LI<0 the water is corrosive and highly irritating. A tolerance of ±0.4 is normally acceptable.

The Langelier formula is expressed as: LI = pH + TF + HF + AF – 12.5

Where:

LI = Langelier Index (also called Saturation Index)

pH = pH of the water

TF = temperature factor

HF = hardness factor, log (Ca hardness, ppm as CaCO)

AF = alkalinity factor, log (alkalinity, ppm as CaCO)

To calculate the exact Langelier Index of your water please use the WATER INDEX reference tables.

For most pools, water is balanced if:

• The pH value is maintained within the recommended ranges of pH 7. 2 – 7. 6

• Ideally, the Alkalinity should be maintained within a range of 80 – 125 ppm

• The Calcium Hardness should be maintained within a range of 200 – 400 ppm.

To calculate your water balance, three parameters must be measured; calcium hardness, alkalinity, and pH. Find the hardness and alkalinity factor in the reference tables below.

The water temperature is, in general, maintained between 24°C and 34°C. Assuming the temperature is kept within those ranges, an average value or 0.7 may be used.

Swimmimg pool Water Balance

Swimmimg Pool Water Index


Multiparameter Photometer for Pool and Spa Testing

HI83326 Pool and Spa PhotometerThe above-mentioned parameters can be measured with one instrument: HI83326 Photometer for Pool and Spa Applications. This photometer features an innovative optical system that uses LEDs, narrow band interference filters, focusing lens and both a silicon photodetector for absorbance measurement and a reference detector to maintain a consistent light source ensures accurate and repeatable photometric readings every time.

 

BL121 Swimming Pool & Spa Controller

bl121-right-facing_2The BL121 Swimming Pool Controller is a complete system designed for maintaining a swimming pool, hot tub, and spa disinfection water quality. The BL121 is available in two configurations. The basic version is the in-line model which allows for direct installation of probe and chemical injection fittings into existing piping. The other version is a panel mounted version with a bypass flow cell. The bypass flow cell allows for calibration and maintenance of the probe without having to shut down the recirculation pump. Additional features of the BL121 include LED indicators for dosing, meter status and service, real-time graph display, programmable alarms, and password protection.

 

Any thoughts?

Browse other posts

Login

Login to your account or create one right now to access to our exclusive content.