Cleaning & Disinfection Solution for Dairy Products (25 x 20 mL Sachets)

Name: Cleaning & Disinfection Solution for Dairy Products (25 x 20 mL Sachets)
SKU: HI700641P
Price: 45.00 EUR

€45.00

In stock

The HI700641P is a highly effective cleaning and disinfection solution that is specially formulated for use with pH electrodes that become coated with dairy deposits including milk, cheese, yogurt and ice cream. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna's cleaning solutions eliminate impurities and residues that are left on the electrode surface after taking measurements of a dairy product. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and prevent any clogging of the junction. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna's line of cleaning solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet.

Specially formulated cleaning solution to remove wine deposits from a pH electrode
Convenient, one-time use sachets ensure freshness of solution

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Description

The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode then inaccurate readings will result.

The Cleaning Solution Series ensures maximum efficiency and accuracy of your sensors when used for it’s designated application. Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. The HI700641P is a cleaning and disinfecting solution made specifically for applications that involve the measurement of pH in dairy products.

Light block foil packaging

Light-tight packet helps to prevent against degradation by UV light

One-time use sachet packets

Ensures quality and freshness of solution

Each sachet marked with lot number and expiration date

Hanna cleaning solutions are specially formulated to have an expiration of 5 years from manufacture for an unopened sachet.

This website is available for the following countries: Algeria, Angola, Benin, Burkina Faso, Burundi, Cameroon, Cape Verde, Chad, Comoros, Côte d'Ivoire, Eritrea, eSwatini, Ethiopia, Gabon, Gambia, Ghana, Djibouti, Jordan, Guinea, Equatorial Guinea, Guinea-Bissau, Kenya, Lebanon, Liberia, Libya, Madagascar, Malawi, Mali, Morocco, Mauritania, Niger, Nigeria, Palestine, Central African Republic, Republic of the Congo, Democratic Republic of the Congo, Rwanda, São Tomé and Príncipe, Senegal, Seychelles, Sierra Leone, Somalia, Sudan, South Sudan, Tanzania, Togo, Tunisia, Uganda and Zambia.